Panasonic Omnivision PV-C2541 Operating Instructions Manual page 42

Check the following points once again if you are having trouble with your unit.
No power...
No picture or sound...
Poorpicture w _ normal s ound...
Poor sound with normal picture...
Poor TV reception..,
No color or poor co}or...
Ghost (multiple) images...
TV progran_canr'_i bs watched..,
Channel cannot be selected...
"T'V program cannot be recorded..
Timer recording cannot be
_edon'ned...
piclureis noisyor mntaJnss_zeaks_,.
VCR cannot be contreHed...
Unit cannot be controlled.,.
ACTION, PROGNCR+ and FM/
'IV buttons cannot be seJeoted...
Video cassette cannot be
inserted...
Video _tte cannotbe
removed...
rape cannot be ejected or
nserted,,.
Video cassette ejects when a
recording is started, orthe power
is turned off for timer recording...
In Stop nloda, the VCR motor
(CYLINDER) eontinuesto rotate...
VCR cannotbe controlled...
* Completely inserl Power Plug into an AC outlet.
, Set POWER button to ON.
* Make sure your antenna system (TV or CABLE) is correctlyset, (P. 8-11)
* Completely insert Power Plug into an AC o_et.
, Set POWER buttonto ON.
, Adjust BRIGHTNESS, SHARPNESS, and PICTURE controlsin the
SET UP TV menu. (P. 20)
, AdjustVOLUME oonlml. (P. 16)
, Adjust S HARPNESSandPICTUREcontrols inthe SET UP "IV menu.{P. 20)
, AdjustTINT and COLOR controtsin theSET UP "IV menu. (P. 20)
• Installa directional antenna. • ,
• Make sure the serectedchannel is in unit'smemory. (P. 12, 13)
• Only the channelbeing recorded can be viewed on this unit.
• Make sure your antenna system (TV or CABLE), is correctlyset. (P. 8-1 f)
• Make sure cassette record tab is intacl. (P.4)
• Check that dock is set to current time and date.
• Make sure DSS/CABLE box (il _Jsed)is left on and tuned to channel to
be recorded.
° Set recording Start/Stop limes correcth/.(P. 22-23)
• .Timerr.e.cordingmay not be performed or continued if a power
interrup_n o! more than 1 minute occurs before or during a Timer
recording even a_terpower is restored.
• Adjust TRACKfNG controlin eiff_erdirection. (P. 41)
• Aim remoteat remote sensor on unit (P. 7) so that signal is
unobstructed.
• Inspectthe remote batteries. (P. 4)
• Make sure VCR LOCK is set to off.(P. 31)
• _ng unit remote sensor Io direct fluorescent or outdoorfightmay
cause stgnal interference.
° Press COMBO button for COMBO mode. (P. 26)
• Check remote batteries,
• Insert the cassette window s_de up; record tab facing you.
° Completely insert Power Prug intoan AC outlet.
° Try ejectingor inserting the tape again after turning POWER off, then
back on.
* Make sure cassette record tab is inlact. (P. 4)
• To enable Quic_kPlay mechanism, the VCR cyfinderwill rotate for
_:]out 3 minutes. This reduces resporlse time from Stop to Play mode
and from PJayto Rewind Search mode,
° Make sure VCR LOCK is set to off. (P, 31)
If you cannbt resolve the problem, please carl the Customer Satisfaction Center for
product assistance at 201--348-9090.
To locate an authorized servicenter call toll free 1-800-211-PANA(7262)
or send e-mail to : consumerproducts@panasonic.com.