Panasonic Omnivision PV-C2541 Operating Instructions Manual page 11

4
Press CH A Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
automatically. If the setup is
completed, the following screen is
displayed.
2/712001 WED 1 2:00PM
DST: ON
SETTING : CH 10
AUTO CLOCK BET
COMPLETED
END ; PRESS OH UP KEY
If AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET )rocedure on page 9.
AUTO CL(X;K SET
I S I NC,OMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
1 ) Press ACTION.
2) Press kV_ I_ to select "CH."
<2D(3DGD
(_ <3D(333
_ c_c) o
_-o o OD (3-1
o_ o_1
SELECT/
A:CH UP
v:CH DOWN
k :VOL UP
4 :VOL DOWN
MAIN MIES",,U
SELECT:& Y ,il I_-
SET :ACTION
3) Press ACTION.
I SET UP CHANNEL
1ANTENNA : CABLE
]AUTO SET
ICHANNEL CAPTION
IVCR_Ius÷ CH SET UP
| SELECT:A v
I SET ;b
I END :ACTION
4) Press &V to select
CABLE BOX SET UP and press I_.
I ARE YOU USING i
A CABLE BOX?
YES
5) Press &_' to select "YES" or "NO"
and press I_.
• If you select...
• "YES" -) Step 6).
• "NO" --) Press ACTIONthreetimesto exit.
ENTER CABLE BOX OUTPUT
CHANNEL
6) Press AV to select the same channel as
your cable box or DSS receiver output
channel, then press I_.
• If necessary,refer to your cable box manual.
• If you are using AudioNideo jack connection
for your cablebox, select and set "VIDEO
OUT" as the output channel.
7) Press ACTION
three times to exit.
11