Advertisement
WHAT'S IN THE BOX
A. 4 Upright Post
F. 2* Top Connecting
Frame
K. 14* M10
L. 2* M10 20mm Bolt
65mm Bolt
ASSEMBLY INSTRUCTIONS
1. Attach 2 Stabilizers (D) onto Bottom Connecting Frame (E) using 4 M10* 90mm Bolts (J), 4 M 10 Lock Nut (N),
8 Washers (M). Secure with Open End Wrenches (O). Do not tighten the 4 M10* 90mm Bolts (J) during this step.
J
2. Attach 4 Upright Posts (A) onto 2 Stabilizers (D) with 8 Upright Post Brackets (H) using 16 M10* 90mm Bolt (J),
16 M10* Lock Nut (N) and 32 Washers (M). Secure with Open End Wrench (0).
Do not tighten the 16 M10* 90mm Bolt (J) during this step.
Attach 2 Top Connecting Frames (F) onto 4 Upright Posts (A) using 8 M10* 65mm Bolt (K), 8 Lock Nuts (N),
16 Washers (M). Secure with Open End Wrench (O). Do not tighten the 8 M10* 65mm Bolt (K) during this step.
B. 2 Safety Arm
G. 2* Hook
H. 8* Upright Post
M. 70* Washer
J
M
M
M
N
D
C. . 1* Pull Up Bar
I. 2* Counterweight
Bracket
N. 34* M10 Lock Nut
M
N
E
D. 2* Stabilizer
E. 1* Bottom
Connecting Frame
J. 20* M10 90mm Bolt
Rod
O. 2* Open End Wrench
N
M
M
N
D
M
J
J
M
www.squatz.com
Advertisement
