Advertisement
8. SET-UP:
Switch SW1 contains a bank of 3 dipswitches
Dipswitch # 3 for Piezo. Turn off for 15-watt audio application.
Dipswitch # 2 toggles operation of the relay
Dipswitch # 1 allows you to choose whether the color will be changed locally
via the push switch or remotely.
Switch
Position
REMOTE / LOCAL On to enable
1
LED color change from idle to Active
with press of the push button.
RELAY On to enable operation of the relay with
SW1
2
activation of the push button.
3
Piezo Sounds On or OFF
Color selection is made with Switches SW2 and SW3. SW2 determines the
Active color and SW3 determines the Idle color.
9. EXPLODED VIEW
12
2
9
CX-DESPK15-54i and CX-DESPK15-55i External 15 Watt Speaker Station
Description
4
1
3
Figure 9.1 - Exploded View
Setting the IDLE Color (SW2)
SWITCH
Position
1
SW2
2
3
Setting the Active Color (SW3)
Switch
Position
1
SW3
2
3
NOTE: If all DIP switches are in the OFF position, there will be no color
illuminated. This allows for no Idle color or no Active color.
7
6
15/16
11
14
INSTALLATION INSTRUCTIONS
Description
ON = Red LED when IDLE
ON = Green LED when IDLE
ON = Blue LED when IDLE
Description
ON = Red LED when Active
ON = Green LED when Active
ON = Blue LED when Active
5
8
10
13
Page 3 of 4
Advertisement
