Adding More Panels - Black Box RS-TOUCH Series Setup Manual

CHAPTER 3: PANELS
NOW YOU CAN LEAVE THE ADMIN WEB PAGES AND PROCEED WITH THE SETUP OF THE ROOM ACCOUNT ON THE PANELS.
A window with room settings is displayed on the touch panel. A keyboard will appear when you tap "+", so that you can enter the room
email (see the Creating resource calendars chapter, step 7). In the field "Room displayed name" you can enter the room name,
which will be shown in the upper left-hand corner of the IN-SESSION panel. Now enter the user email (see the Creating a user account
chapter, step 3) and you can test the configuration via the "Test" button. You can now save the configuration by tapping "OK"
and start using the IN-SESSION panel. To change other detailed settings of the panel, tap "Next." For further information,
see the IN-SESSION Room Scheduler - Setup Guide - Common Settings, Detailed IN-SESSION panel settings chapter.

3.2 ADDING MORE PANELS

Once you have set the first panel and created a new reservation system, you may add more panels to this system. Connect another panel
to your network. The opening screen will appear on the panel. Identically, as when setting the first panel, you can change the language
and IP settings. Then tap "Join to existing system."
NOTE: To join a panel to an existing reservation system, at least one other panel connected to this system must be switched on.
30
FIGURE 3-9. ROOM SETTINGS WINDOW
FIGURE 3-10. OPENING SCREEN
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269