Black Box RS-TOUCH Series Setup Manual page 27

CHAPTER 3: PANELS
In the default setting, the panel is enabled to obtain the IP address and DNS servers using your network's DHCP. Under the item "Current IP
settings," you can check whether the assigned addresses correspond with your network. If this setting does not meet your requirements,
you can change it according to the instructions in IN-SESSION - Setup Guide - Common Settings, the IP settings chapter.
Note the IP address; you will need it in the next step. At this point there is no need to change the item "Magic name";
its function is also explained in the above-mentioned chapter. Create a new reservation system just by tapping on "Create new system."
Panels connected to the same reservation system share their settings, e.g. if you need to change the user account or certificate, y
ou can just do it on one panel and all the other ones within the same reservation system will adopt the change automatically.
The reservation system name and password serve for mutual identification of panels. The password is also used
for accessing the panels' settings. First, touch the "Select server type" field, and select "Google Apps for Work."
FIGURE 3-3. CREATE NEW RESERVATION SYSTEM
FIGURE 3-4. SELECT GOOGLE APPS FOR WORK
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
27