Table of Contents
Advertisement
Installation Procedure
Performing final check and trial operation
To complete the installation, perform the following checks and tests to ensure that the air conditioner operates
correctly.
1 Check the followings.
• Strength of the installation site
• Tightness of pipe connection to detect a gas leak
• Electric wiring connections
• Heat-resistant insulation of the pipe
• Drainage
• Earth conductor connection
• Correct operation (follow the steps below)
After finishing the installation of the air conditioner, you should explain the following to the user. Refer to appropriate
pages in the User's Manual.
1 How to start and stop the air conditioner
2 How to select the modes and functions
3 How to adjust the temperature and fan speed
4 How to adjust the airflow direction
5 How to set the timers
6 How to clean and replace the filters
NOTE
• When you complete the installation successfully, hand over the User's Manual and this Installation Manual to the
user for storage in a handy and safe place.
36
English
Advertisement
Table of Contents
