Cobra MicroTalk MT 615 Manual page 4

OPERATION
Communicating with Another Person
1. Press and hold the TALK button.
2. With the microphone about 5 cm (2 inches) from your mouth, speak in a normal voice.
3. Release the button when you have finished talking and listen for a response.
You cannot receive incoming calls while pressing the TALK button.
NOTE: Both radios must be tuned to the same channel and privacy code to communicate.
Listening for a Response
– Release the TALK button to receive incoming transmissions. Your microTALK
TALK or CALL buttons are not pressed.
Volume Buttons Volume Level
Call Button
– Press and release the CALL button.
The other person will hear a two (2) second ringing tone. You cannot send or receive transmissions during the two (2)
second call tone.
NOTE: Both radios must be tuned to the same channel and privacy code to communicate.
Channel Buttons Channels
NOTE: Both radios must be tuned to the same channel and privacy code (see "CTCSS Privacy Codes" or "DCS Privacy Codes") to communicate.
Lock Function
The LOCK button locks the CHANNEL UP, CHANNEL DOWN and MODE/POWER buttons to prevent
accidental operation.
To Use the Lock Function:
– Press and hold the LOCK button for two (2) seconds to turn the Lock On or Off.
A double beep sound is used to confirm your Lock On or Off request. When the radio is in Lock Mode,
the Lock icon will be displayed.
To Adjust Volume
– Press the VOLUME UP or the VOLUME DOWN buttons.
A dual beep sound is used to indicate that you have reached the minimum (1) or maximum (8)
volume level.
To Select a Channel
– With the radio on, select any of the eight (8) channels by pushing the CHANNEL UP or CHANNEL
DOWN button.
You can press and hold the CHANNEL UP or CHANNEL DOWN button for fast advance.
® is always in LISTENING MODE while the
Talk Button
5 cm (2 Inches)
From Mouth
Listening
Call Button
Lock Button Lock Icon
English