One for All URC 1811 Manual page 5

STEP 1: SET UP YOUR
TELEVISION
THE MAJORITY OF NEWER
LG TVS SHOULD
WORK DIRECTLY.
After putting batteries in, just test
some of the keys, and if they work,
your remote is ready. If not, follow the
next steps:
1
Make sure your TV is on (not on
standby).
Hold down RED + BLUE until the LED
behind the Power Key blinks twice
2
Point towards the TV and hold down
the POWER KEY until the TV turns off.
The remote will send a different
Power signal every 3 seconds
As soon as the TV turns off, let go of
the POWER KEY.
The LED will blink twice. Now test the
rest of the keys on the remote, if they
work as your original did, your remote
is ready to use.
FINISH
If you find some keys still do not work
as expected (or at all), proceed
to the next step.
ENGLISH
STEP 2: IF STEP 1 DOES NOT
WORK AS EXPECTED
ARE SOME KEYS NOT
WORKING AS EXPECTED?
If you find some keys do not work as
expected (or at all), proceed to the
next step.
1
Make sure your TV is on
(not on standby).
Hold down RED + BLUE until the LED
behind the Power Key blinks twice
2
Point towards the TV and hold one of
the keys that is not working correctly
(for example Q-MENU).
The remote will send a signal every
3 seconds.
When the correct function is shown
on the screen (in this case the Q-MENU),
let go of the key.
The LED will blink twice - your
remote is ready to use
FINISH