Table of Contents
Advertisement
Next steps
1. Install the
power-button
2. Install the
system
board.
NOTE:
The system board can be installed as an assembly with the fan and heat-sink assembly, ethernet and audio
board, and USB board attached.
3. Install the
keyboard-controller
4. Install the
power adapter
5. Install the speakers.
6. Install the
memory
module.
7. Install the
wireless
card.
8. Install the
solid-state
9. Install the
display
assembly.
10. Install the touchpad.
11. Install the
rear
cover.
12. Install the battery.
13. Install the
base
cover.
14. Follow the procedure in
86
Removing and installing Field Replaceable Units (FRUs)
assembly.
board, if applicable.
port.
drive.
After working inside your
computer.
Advertisement
Table of Contents
