Viewing The Connections - Side Connectors - SchaubLorenz 22LE5100C Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: S-VHS signal is supported via the scart socket.
5.
PC Input
is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.
6.
S/PDIF Coaxial Out
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input

Viewing the Connections - Side Connectors

1.
CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see "Conditional
Access" section.
2.
Side USB input.
3.
TV control buttons.
4.
Side audio-video connection
signals of external devices. To make a video connection, you must use the
supplied AV connection cable for enabling connection. First, plug singular
jack of the cable to the TV's Side AV socket. Afterwards, insert your video
cable's (not supplied) connector into the YELLOW input (located on the
plural side) of the supplied AV connection cable. Colours of the connected
jacks should match.
To enable audio connection, you must use RED and WHITE inputs of
the side AV connection cable. Afterwards, insert your device's audio
cable's connectors into the RED and WHITE jack of the supplied side AV
connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED &
WHITE) to enable sound connection when connecting a device to your TV
by using PC or COMPONENT VIDEO input.
5.
Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
02_[GB]_MB60_DVB-TC_3910UK_22915LED_LED_NICKEL16_10069941_50175876.indd 46
outputs digital audio signals of the currently watched source.
input is used for connecting video and audio
English - 46 -
30.09.2010 14:31:58

Advertisement

Chapters

Table of Contents
loading

Table of Contents