Assembling The Vacuum Cleaner - TECHWOOD TAS-651 Instruction Manual

Do not place the appliance near the heat source.

ASSEMBLING THE VACUUM CLEANER

Assembling the flexible tube
Unplug the unit
Put the end of the hose into the air intake socket. (on the tank)
Fix the floor brush on the other end of the hose.
USE
1. Before using the appliance, unwind length of cable and insert the plug into the
power socket.
2. Press the ON/OFF button to switch the appliance on.
3. Adjust the angle between the brush and the body by rotating the handle.
4. Stop the unit working by pressing the On / Off button.
5. Unplug is and rotate the cable on winding holder.
8