Seco SANTOKA 10.1 SG IPS Product Manual page 6

Arm cortex-a9 flush mount
Table of Contents

Advertisement

IV. Approvals

The SANTOKA may be equipped with a certified transmitting module.

The internal / external antenna(s) used for this module must provide a separation distance of at
least 2 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.
The outside of final products containing the SANTOKA module must display in a user accessible
area a label referring to the enclosed transmitting module. This exterior label can use wording
such as the following12: "Contains Transmitter Module FCC ID: (insert the modules FCC ID) " or
"Contains FCC ID: (insert the modules FCC ID) ".

Approved antennas list: For the WLAN/Bluetooth module WPEA-152GN(BT) a dipole antenna with
2 dBi (peak) gain is approved
V. FCC

To comply with FCC and Industry Canada RF exposure limits for general population /
uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 2 cm from all persons and operating in conjunction with any other
antenna or transmitter, except in accordance with FCC multi-transmitter product procedures
PRODUCT MANUAL
SANTOKA
6

Advertisement

Table of Contents
loading

Related Products for Seco SANTOKA 10.1 SG IPS

This manual is also suitable for:

Santoka vision 10.1 fm mx6

Table of Contents