This appliance is designed for single household domestic use
•
in an indoor environment.
This appliance may be used in, offices, hotel guest rooms, bed
•
& breakfast guest rooms, farm guest houses and other similar
accommodation where such use does not exceed (average)
domestic usage levels.
Do not change the specification of this appliance.
•
The appliance maximum load is 8 kg. Do not exceed the
•
maximum load of each programme (refer to the "Programmes"
chapter).
The operating water pressure at the water entry point from the
•
outlet connection must be between 0.5 bar (0.05 MPa) and 10
bar (1.0 MPa).
The ventilation opening in the base must not be covered by a
•
carpet, mat, or any floor covering.
The appliance must be connected to the water mains using the
•
new supplied hose sets, or other new hose sets supplied by
the Authorised Service Centre.
Old hose sets must not be reused.
•
If the mains power supply cable is damaged, it must be
•
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
Before any maintenance operation, deactivate the appliance
•
and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to clean
•
the appliance.
Clean the appliance with a moist cloth. Use only neutral
•
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
SAFETY INSTRUCTIONS
INSTALLATION
The installation must comply with
relevant national regulations.
•
Remove all the packaging and the transit bolts
including rubber bush with plastic spacer.
•
Keep the transit bolts in a safe place. If the
appliance is to be moved in the future they must
be reattached to lock the drum to prevent an
internal damage.
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
•
Follow the installation instructions supplied with
the appliance.
•
Do not install or use a damaged appliance.
3