Assembly
1
Attaching the column and the socket assembly
□
Thread the socket assembly (D), the columns (E/F/G) and the
base (H) together as shown. Hand-tighten until snug.
□
As you thread the socket assembly (D), the columns (E/F/G) and
the base (H) together, continuously pull the power cord (I) from
the bottom of the base (H).
2
Installing the harp
□
Insert the harp (C) prongs into the saddle of the socket
assembly (D).
□
Slide the retaining covers over the joints to secure the harp
(C) and the socket assembly (D) together.
4
D
E
F
G
H
I
C
D
Saddle