Asus AM1M-E Manual page 25

Table of Contents

Advertisement

4.
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~2)
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk
drives and optical disc drives.
AM1M-E
AM1M-E SATA 6.0Gb/s connectors
You must install Windows
hard disk drives.
When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI].
5.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
AM1M-E
AM1M-E Serial port connectors
The COM module is purchased separately.
ASUS AM1M-E
XP Service Pack 3 or later version before using Serial ATA
®
COM
PIN 1
1-17

Advertisement

Table of Contents
loading

Table of Contents