Table of Contents
Advertisement
USB MP3 Playback
1. Insert the USB storage device to the USB port on the unit.
2. Select the USB function by pressing F on the unit or F on the remote control. When you select USB function,
the USB storage device will be played automatically.
3. Select a file you want to play by pressing Y/U on the unit or C/V on the remote control.
, MP3 Playback Requirement
y Bitrate : 32 kbps - 448 kbps
y Sampling Frequency : 8 KHz - 48 KHz
Removing the USB Device from the unit :
1. Choose a different function or press Z on the remote control.
2. Remove the USB device from the unit.
To
Stop
Playback
Skipping to the next/previous
file
Pause
Playing repeatedly or randomly
, Note
y If you use an USB extension cable or USB hub, the USB device is not recognized.
y Some USB device may not work with this unit.
y During random playback, a same file that was being played may be played again.
y You can play only MP3 file.
LH64B_LH62B_LH64G_LH62G.AINDLLK_ENG.indd 11
USB Storage Device
Do this
Press Z on the remote control.
Press T on the unit or d/M on the remote control.
Press Y/U on the unit or C/V on the remote control to skip
the file in stop state.
During playback, press U on the unit or V on the remote control to go
to the next file.
Playing less than 3 seconds, press Y on the unit or C on the remote
control to go to the previous file.
Playing after 3 seconds, press Y on the unit or C on the remote
control to go to the beginning of the file.
During playback, press T on the unit or d/M on the remote control.
Press REPEAT on the remote control repeatedly, the display changes in the
following order.
ONE h / ALL h / SHUFFLE G / OFF
Using External device
11
2016-06-30
4
4:05:21
Advertisement
Table of Contents
