Table of Contents
Advertisement
28 • TRAXXAS
ADJUSTING YOUR MODEL
Dual Rear Camber Link Mounts
There are two separate
mounting points for the
rear camber links. Changing
the location does not affect
performance, but will allow
the use of different bodies.
The lower mounting points
LOWER
should be used with low-profile
MOUNTING
bodies; the upper mounting
points will work with most
body styles. Both mounting
points feature two holes for
wheel camber adjustment.
Moving the links from the standard holes to the outer holes will
increase camber and slightly reduce roll stiffness. This modification
also requires adjustable camber links (part #8341X, sold separately) to
lengthen the links and ensure proper camber settings.
Suspension Droop Adjustment
Suspension droop is the amount of downward travel on the wheels
Mounting Holes
(how much the suspension arm hangs down when the chassis is
UPPER
off the ground). Molded screw bosses in the suspension arms allow
MOUNTING
you to adjust droop by using a 4mm set screw (part #4897, sold
separately). Tightening the screw will decrease droop and allow you
Mounting Holes
to tune the suspension for better stability when cornering.
Advertisement
Table of Contents
