Advertisement
Operation
Cleaning the compartment
Before powering on your NordMende wine cooler, clean inside of the appliance and
check that the drainage pipe has a good connection. (For details, please refer to the
"maintenance and cleaning" section).
Level the appliance
Before powering on, level the appliance on a firm and dry floor for at least 1 hour.
Switching on for the first time
• Insert the mains plug into an easily accessible and properly installed socket
(220–240 V~ /50 Hz).
• Press the power key
• The temperature indicator
o left for the upper zone.
o right for the lower zone.
• Once powered on you will hear the compressor start to work and the appliance will
begin cooling. It will be ready for use after 1 hour of cooling. If this does not
happen you should check the power connection.
Control panel
All keys are invalid in lock mode. Please unlock first by pressing both the power key
and light key at the same time for 3 seconds to unlock.
Key tones
Each time you press one of the keys you will hear a beep. This tells you that the
appliance has registered your keypress.
ON/OFF
Press the power key for 3 seconds, this powers down the appliance and it goes to
stand-by mode. Keep pressing the power key again for 3 seconds to return back to
normal operation.
and a beep will sound.
will show the current internal temperatures -
10
Advertisement
