Table of Contents
Advertisement
Troubleshooting
1. If the refrigerator does not run:
Check the supply voltage is available at the socket and check that the power plug is
correctly connected.
2. If the refrigerator does not become cold enough:
a. Is the thermostat set too low? (setting 1 is warmest setting 7 is coldest)
b. Is there enough space around the refrigerator?
c. Is the door opened too frequently or not closed properly? (check seals).
d. Is there direct sun shine on the appliance or are there heat sources nearby?
e. Is there too much food inside the compartment?
f. Is there dust and debris built up on cooling matrix or compressor?
3. Food is freezing or too cold in refrigerator compartment:
a. There is too little food in the refrigerator
b. Thermostat is set too high
4. If the refrigerator operates noisily:
a. Check that the appliance is installed on a stable, level floor. Adjust the feet if nec-
essary. The refrigerator is too near the wall (use the spacer pegs provided).
b. The food stored in the refrigerator is not touching - particularly applies to bottles.
The refrigerator creates very slight vibrations, which can be amplified greatly with
touching bottles!
Note:
During high relative humidity environment, condensation may occur on the surface
of the refrigerator. This is not a malfunction. Simply clean the surface of condensa-
tion.
If the refrigerator is not working properly after all these checks, contact the service
help line without further delay.
10
SR11010.indd 10
15/01/2019 09:12
Advertisement
Table of Contents
