Remote Control - LG LX30 Series Owner's Manual

Audio connection
Speaker Output Setup
(This feature is not available for all models.)
Connect the external speaker to the SPEAKER OUT jack on the TV.
EXTERNAL
SPEAKER OUT
Control port for Speaker out
+
-
NOTE
• Do not connect your headphones or earphones to the port for
connecting an external speaker.
• Use only with the 3 Pole 3.5mm Stereo Jack.
Method of Volume control port
* Cable Spec.
GND / UP / Down
14
VOLUME
CONTROL
UP
DOWN
GND
RIGHT
LEFT
GND
Each Up/ Down pin is pulled to 3.3V
with CPU GPIO.
CPU detects transition from 3.3V
to GND level for volume control.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.

Remote control

(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
• Do not mix old and new batteries, as this may damage the remote
control.
• In Analogue TV and some countries, some remote control buttons
may not work.
• The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
A
(POWER) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Selects an AV mode.
Resizes an image.
1
Changes the input source.
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
ends to the label inside the
A
B