Braun 83XXcc Manual page 10

Cleaning indicator (with Clean & Charge station usage only)
Usage
Make sure that the shaver is disconnected from the power supply. Press the on / off
button (4) to operate the shaver.
Tips for a perfect shave
1. Position the shaver at the right angle (90°) to your skin.
2. Stretch your skin slightly with your hand.
3. Shave against the direction of your beard growth.
MultiHeadLock switch (head lock)
The shaver head can be locked in five positions to shave hard-to-reach areas
(e.g. under the nose).
• Slide the Multi Head Lock switch (3) down to lock the shaver head.
• Move the shaver head manually to your desired position.
• For automatic cleaning in the Clean & Charge Station the head lock needs to be
released.
Precision trimmer
The trimmer can be used to trim sideburns, moustache or beard.
• Press the release button (8) and slide the trimmer (6) upwards.
Travel lock
The shaver can be locked to avoid unintended starting of the motor (e.g. for storing in a
suitcase).
• Press the on / off button (4) for 3 seconds to lock / unlock the shaver. This is
confirmed by a beep sound and the lock icon appearing / disappearing on the
display.
Foil replacement
To maintain 100% shaving performance, replace the Foil & Cutter cassette (1), when
the foil replacement indicator lights up and no status segments are visible.
• To remove the Foil & Cutter cassette press the release button (2).
• Press the on / off button for 8 seconds to reset the counter.
• Afterwards you need to unlock the shaver (see chapter «Travel lock»).
• On some shaver models the replacement indicator will reset automatically after
7 shaves.
10
The cleaning indicator lights up after
each shave as a reminder that the shaver
should be cleaned in the Clean & Charge
Station.