Table of Contents
Advertisement
Available languages
Available languages
Problem
Excessive suds.
Cannot apply
additional detergent.
Stops.
WW80J3283KW_DC68-03612B-01-EN.indd 41
•
Make sure the Auto Detergent and Auto Softener settings are
properly configured.
•
Make sure you use the recommended types of detergent as
appropriate.
•
Use high efficiency (HE) detergent to prevent oversudsing.
•
Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
•
Non-HE detergent is not recommended.
•
Make sure the remaining amount of detergent and fabric
softener is not over the limit.
•
Make sure the Auto Dispense function is activated, with both
the Water Hardness and Concentration settings properly
specified (applicable models only).
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the door and press the Start/Pause button to start the
washing machine.
For your safety, the washing machine will not tumble or spin
unless the door is closed.
•
Before the washing machine starts to fill, it will make a series of
clicking noises to check the door lock and does a quick drain.
•
There may be a pause or soak period in the cycle. Wait briefly
and the washing machine may start.
•
Make sure the mesh filter of the water supply hose at the water
taps are not clogged. Periodically clean the mesh filter.
•
If the washing machine is not supplied with sufficient power,
the washing machine temporarily will not drain or spin. As soon
as the washing machine regains sufficient power, it will operate
normally.
Action
English 41
2016/3/9 15:21:16
Advertisement
Chapters
Table of Contents
