Baxton Studio 254C Assembly Instruction

ASSEMBLY INSTRUCTION
Read this instruction carefully. Remove all wrapping material, staples and straps
from the carton. See hardware and furniture part list for guidance. Be sure you
have all wooden furniture parts on a clean and flat soft surface, such as a carpet or
rug, to prevent from being scratched.Follow the figure to start assembling.
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread.
3. Keep all hardware part out reach of children.
STEP 1.1
Firstly, stick E to C for both left and
right side.
C
E
STEP 1.2
Then, attached STEP 1.1 to B
according to the hole and tighten it
using hardware number 2,3,4 and 6.
2
3
4
B
C
STEP 2
Continued with combine the whole
part from STEP1.2 to A . Tighten the
part of C and A using hardware
number 3,1 and 6 . Then cover the
hole with F.
3
1
C
A
6
C
C
NO PART LIST
A BACK REST
FRONT LEG
B
SIDE RAIL
C
BENT WOODEN SEAT
D
E CENTER SUPPORT
F WOOD BUTTON
STEP 3
Stick the whole assemble part to D
according to the marked and
fully-tighten it with hardware number 5 .
6
F
A
D
MODEL : 254C
QTY NO DESCRIPTION
1 PC 1 JCBC SCREW M6 X 70MM
1 PC
2 JCBC SCREW M6 X 50MM
2 PCS
3 SPRING WASHER
1 PC
4 WOOD DOWEL Ø8 x 30MM
1 PC
5 5
CSK SCREW M4 x 30MM
4 PCS
M4 ALLEN KEY
6
STEP 4
5 X 4PCS
BENT
WOODEN
SEAT
COMPLETE
ASSEMBLE
QTY
4 PCS
2 PCS
6 PCS
4 PCS
4 PCS
1 PC