Basic Settings; Top Up With Rinse Aid; Top Up With Salt - Pelgrim GVWC310L/P04 Instructions For Use Manual

Basic settings

The first time the dishwasher is switched on, it is important that you choose the right settings to ensure
good dishwashing results. See page 21.
Set up:
Rinse aid
Water hardness
TAB (All-in-one detergent)

Top up with rinse aid

Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better
dishwashing result with clear and spotless dishes.
Top up the rinse aid compartment with rinse aid if you have selected Rinse aid 3:01 - 3:05.
Lift up to open
Press to close
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked MAX.
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.

Top up with salt

Add salt to the salt compartment if you have selected Water hardness 4:01 - 4:09.
1. Remove the salt compartment lid by turning it anticlockwise.
2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. First, pour in
about 1 l of water.
3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt.
4. Wipe up any excess salt so that the lid can be screwed on firmly.
WARNING!
In order to avoid rust stains a dishwashing program must be started immediately after adding
salt.
8