Frigidaire FRA126CT116 Use & Care Manual page 6

Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING:
remote
sensing
tamp/timer
auto
hi [] fi|ter med
Zo reset
V ON=OFF A FAN SPEED
DO THIS:
PRESS A TO RAISE
PRESSV TO LOWER
sleep
YOU WILL SEE:
remote
sensing
tamp/timer
F
auto
hi , filter
mad
Zo reset
V ON=OFF A FAN SPEED sleep
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
60 °F (16 °C) and 90 °F (32 °C). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO AD3UST FAN SPEEDS:
emote
sensing
temp/timer
F
v ON-OFF A
auto ,,/1
hi .
filter
med
Zo reset
FAN SPEED sleep
\
DO THIS:
YOU WILL SEE:
remote
sensing
temp/timer
auto !
medhi / filter
lo , reset
V ON-OFF A FAN SPEED sleep
PRESS TO SELECT
TO USE AUTO FAN FEATURE:
remote
sensing
tamp/rimer
auto J
reed
lo []
lifter
reset
V ON-OFF A FAN SPEED
,_
-\
DO THIS;
sleep
PRESS FAN BUTTON,
CHOOSE AUTO
YOU WILL SEE:
remote
sensing
temp/timer
auto [] I
medhi / fitter
Zo reset
V
0N=0FF
A FAN SPEED
sleep
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed.
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.
@2009 Electrolux Home Products, Inc. All rights reserved.