Advertisement
CB18 Control Box Instructions
1. Product Overview
Product Name： Control Box
Product Model No.： CB18
FCC ID: 2AEQWCB18HHC004
2. Environment requirement
Operation temperature: +10℃~ +40℃.
Storage temperature: －10℃~65℃.
Operating Humidity：10%~80%RH，non‐condensing.
Storage Humidity：10%~ 85%RH，non‐condensing.
3. Directions for Operation
To use the control box, the PSK2920A switch power supply must be connected as the control
box power supply. The CH18 remote control must also be paired to be used. Detailed usage for
each port is as follows:
Before use, the CH18 remote control and CB18 control box must be paired:
Press and hold the button, approx. 15 seconds, until the remote's front indicator lights
up. Then, connect it to the control box Power plug. After the beep sound, the pairing is complete
and remote can operate.
Indicator
light
1/3
Advertisement
Table of Contents
Related Manuals for HHC CB18
Summary of Contents for HHC CB18
- Page 1 FCC ID: 2AEQWCB18HHC004 2. Environment requirement Operation temperature: +10℃~ +40℃. Storage temperature: －10℃~65℃. Operating Humidity：10%~80%RH，non‐condensing. Storage Humidity：10%~ 85%RH，non‐condensing. 3. Directions for Operation To use the control box, the PSK2920A switch power supply must be connected as the control box power supply. The CH18 remote control must also be paired to be used. Detailed usage for each port is as follows: Before use, the CH18 remote control and CB18 control box must be paired: Press and hold the button, approx. 15 seconds, until the remote’s front indicator lights up. Then, connect it to the control box Power plug. After the beep sound, the pairing is complete and remote can operate. Indicator light 1/3 ...
- Page 2 LED USB SYNC Cord Connection Connection Power Input connection Connection Foot Massage Head Massage Head Motor Port Motor Port Motor Port Foot Motor Port Tilt Motor Port 4. The port is introduced 4.1 “HD Motor” ：Connects to the Head motor, and lifts/lowers head section. 4.2 “FT Motor” ：Connects to the Foot motor, and lifts/lowers foot section. 4.3 “Tilt Motor” ：Connects to the Tilt motor, and adjusts tilt. 4.4 ...
- Page 3 on/off. 5. Matters needing attention： 5.1 The function will only work normally in proper working power conditions. 5.2 Control box input voltage must be less than 29.2VDC. 5.3 The CH18 remote control is needed for proper control. 5.4 If problems are identified, they must be treated by professional personnel. 6. Additional attention for user： 6.1 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ...
Need help?
Do you have a question about the CB18 and is the answer not in the manual?
Questions and answers