Atag VA8215SLR/A02 User Manual page 217

Troubleshooting
Problem
Bad odour in dishwasher.
Grease deposits in the
dishwasher.
The dishes are not dry enough.
46
Possible causes
Dirt around the seals and in
corners.
Low temperature programs have
been selected for a prolonged
period.
Low temperature programs have
been selected for a prolonged
period.
The Automatic door opening
option is not activated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
The setting TAB is activated and
all-in-one detergent with
insufficient drying effect is being
used.
Action
Clean with washing-up brush
and low foaming cleaner.
Run a program with a high
temperature once or twice a
month. Or run a self-cleaning
program. See Self-cleaning in
the chapter Using the
dishwasher.
Select a program with Intensive.
The program will use a higher
temperature to dissolve grease
on very dirty dishes. Or run a
self-cleaning program once or
twice a month. See Self-cleaning
in the chapter Using the
dishwasher.
Activate the Automatic door
opening option.
Fully load the dishwasher.
Top up with rinse aid or increase
the rinse aid dosage setting.
Switch all-in-one detergents or
deactivate the setting TAB and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.