Advertisement

Quick Links

Operating Instructions
VA8018TT

Advertisement

Table of Contents
loading

Summary of Contents for Atag VA8018TT

  • Page 1 Operating Instructions VA8018TT...
  • Page 2: Table Of Contents

    Quick guide Care and cleaning Dear ATAG customer! We hope that you will have many years of use from your new machine. To get the most out of your new dishwasher, we recommend that you read the operating instructions before using the dishwasher.
  • Page 3: Safety Instructions

    Safety instructions Read the operating instructions and keep WARNING! them in a safe place! Children must be supervised – dishwasher Number of standard place settings: 17 detergent is corrosive! Never use the dishwasher for any purpose other than that specified in these operating Activate child lock (button lock) instructions.
  • Page 4: Before Washing For The First Time

    Before washing for the first time 1. Checking water hardness 2. Basic settings In order to achieve good dishwashing results, the dishwasher needs To switch on the dishwasher, press and hold the main power switch soft water (water with low mineral content). Hard water leaves a white until the display lights up.
  • Page 5 3. Top up with rinse aid 4. Top up with salt Drying is faster and a better result is achieved if you use rinse aid. You Before you begin using a dishwasher with a water softener, you must will also achieve a better dishwashing result with clear and spotless fill the salt compartment with salt for the water supply to be softened dishes.
  • Page 6: Loading The Dishwasher

    Loading the dishwasher Energy-efficient dishwashing Fragile dishes Run programmes only with a full load Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand strong heat, others can be damaged Wait to run a programme until the dishwasher is full, this way you save by dishwashing detergent.
  • Page 7 The dishwasher's baskets The dishwasher is equipped with a top cutlery tray, an upper basket, a middle basket and a lower basket with a cutlery basket. The appearance of the baskets may differ depending on the dishwasher setup. Top cutlery tray The top cutlery tray has space for cutlery, ladles, whisks, serving cutlery and similar items.
  • Page 8 Washing larger items The two baskets in the middle basket can be removed, or the entire middle basket can be removed, to create more space between the upper and lower baskets if larger items are being washed. Lower basket Place plates, side plates, serving dishes, pots and cutlery (in the cutlery basket) in the lower basket.
  • Page 9: Using The Dishwasher

    Using the dishwasher Add detergent NOTE! Use only dishwasher detergent! Washing up liquid must not be used Press to open as the foam that forms prevents the dishwasher from operating effectively. Dishwasher tablets Halve the tablet if it is difficult to close the dispenser lid. There is a risk that the detergent will not be released properly if the lid is tight and will not open correctly.
  • Page 10 Press and hold the main power switch until the display lights up. Starting the dishwasher START STOP 2:00 Speed mode Select the programme Select a programme mode Select any options Crystal glass The main power switch A gentle dishwashing programme with a low temperature for washing fragile items made of crystal/glass.
  • Page 11 Intensive mode If you want to load more dishes Improves the dishwashing results, but the dishwasher uses more energy Open the door. The dishwasher stops automatically. Add the dishes and water. The programme time is extended. and close the door. After a while, the dishwasher continues the Select an option programme.
  • Page 13: Settings

    Settings Open the dishwasher's Settings menu To open the dishwasher's Settings menu, press the Navigation button until Settings menu is shown on the display and confirm your selection with the mode selector To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector Navigation buttons for choosing setting Mode selector to confirm current setting START...
  • Page 14 Settings Options Rinse aid 0/1/2/3/4/5/TAB Setting for rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High dosage). Increase the rinse aid dosage: If the dishes have water marks. Decrease the rinse aid dosage: If the dishes have a sticky white/blue film.
  • Page 15: Care And Cleaning

    Care and cleaning Top spray arm Coarse filter The upper basket must be removed before the top spray arm can The coarse filter traps larger food particles, which cannot get past the be released. Pull out the upper basket and turn the basket catch drainage pump.
  • Page 16 Front panel Keep the buttons clean and free from grease. Wipe them clean with a dry or slightly damp cloth. Never use cleaners – they can scratch the surface. Use the main power switch to turn off the dishwasher before cleaning the buttons to avoid activating any buttons unintentionally.
  • Page 17: Troubleshooting

    Troubleshooting Type of fault on the display Action Overfilling water 1 Clear the drainage pump. See the section Care and cleaning. If the problem persists, call the service department. Water outlet fault See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists, call the service department.
  • Page 18 Problem Possible causes Action The dishes are not clean. The spray arms do not rotate. Check that the dishes are not blocking the spray arms. Spray arm holes or bearings blocked. Clean the spray arms and the middle basket's spray pipe. See the chapter Care and cleaning. Unsuitable dishwashing programme.
  • Page 19 Problem Possible causes Action Water remains in the dishwasher. The filters are blocked. Clean the coarse and fine filters. The filters are not fitted correctly. Check that the filter handle is locked in the stop position. The handle should point straight out from the dishwasher.
  • Page 20: Technical Information

    Technical information Information on energy labelling Information sheet, in compliance with Commission Delegated Regulation (EU) No. 1059/2010 ATAG Model designation: VA8018TT Number of standard place settings: Energy efficiency class: Annual energy consumption(AE 276 kWh per year Energy consumption of the standard cleaning cycle(E 0.97 kWh...
  • Page 21: Installation

    Installation [mm] 1238 30-94 *Remove locking nuts for an installed height of 860-861 mm. **Door length. Nominal dimensions. Actual measurements may vary. It is important that you read through and follow the instructions and Drainage connection directions below. Conduct installation and connection in accordance See the separate installation instructions for necessary information.
  • Page 22: Service

    Service heating, solar power or geothermal power. Choosing a hot water Read the chapter Troubleshooting before contacting the service connection cuts dishwashing times and reduces the dishwasher's department. If you have encountered a problem that you cannot resolve, energy consumption. please contact your nearest dealer.
  • Page 23: Information For Test Institute

    Information for test institute Request test institute information via e-mail dishwashers@appliance-development.com. The request should include the details on the serial number plate. Include the article number (1) and the serial number (2). ART. NO. SERIAL NO.
  • Page 24: Quick Guide

    Top up salt and rinse aid to achieve good washing and drying results. (See page 4.) Top up rinse aid Top up salt Select a programme, programme mode and any options (See page 10.) Press Start/Stop, close the door START STOP www.atag.nl...

Table of Contents