Your Dishwasher - Atag VA7214LR/A02 User Manual

On/Off
WiFi
Select program
Symbols on the display:
Top up rinse aid
Top up salt
Auto dose
Top up auto dose
Install the dishwasher, see the chapter Installation. Then open the door and press
"This is a first time setup." is shown on the display the first time the dishwasher is switched on. It
is important that you choose the right settings to ensure good dishwashing results. See page 7.
You can remote control this dishwasher with your smartphone/tablet. Connect the dishwasher to
your wireless network and pair with your smartphone/tablet to be able to remote control and start
the dishwasher using the ATAG Connect Life app. The app can be used to find information, change
settings and monitor the dishwasher. (The dishwasher can always be used without the app.)
Display
Connected to cloud
(Flashes when connecting)
Remote control active
Press briefly and lightly on the
middle of the upper part of the
door.

Your dishwasher

Select program mode
Delayed start
Text on the display:
Clean the filters
Run Self-cleaning
See the chapter Care and cleaning.
Start/Stop
Automatic door opening
.
3