Mitsubishi Electric PKA-A24KA8 Service Manual page 34

Table of Contents

Advertisement

Display
The main display can be displayed in two different modes: "Full" and "Basic". The initial setting is "Full". To switch to the "Basic"
mode, change the setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
All icons are displayed for explanation.
2 345 6 7
$
#
6
7
8
Room
9
0
Set temp.
Cool
1
1
Mode
!
Operation mode
Preset temperature
Clock
Fan speed
Button function guide
Functions of the corresponding buttons appear here.
Appears when the ON/OFF operation is centrally controlled.
Appears when the operation mode is centrally controlled.
Appears when the preset temperature is centrally controlled.
Appears when the filter reset function is centrally controlled.
Indicates when filter needs maintenance.
Room temperature
Appears when the buttons are locked.
Appears when the On/Off timer or Auto-off timer function is enabled.
appears when the timer is disabled by the centralized control system.
appears when the HOLD function is enable.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Main menu.
TCH115A
8
Fri
83
Auto
83
Temp.
Fan
2
5
<Basic mode>
$
3
#
9
@
Cool
)
1
4
Mode
Appears when the Weekly timer is enabled.
Appears while the units are operated in the energy saving
mode. (Will not appear on some models of indoor units)
Appears while the outdoor units are operated in the silent mode.
Appears when the built-in thermistor on the remote control-
ler is activated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is acti-
vated to monitor the room temperature.
Indicates the vane setting.
Indicates the louver setting.
Indicates the ventilation setting.
Appears when the preset temperature range is restricted.
Appears when an energy saving operation is performed us-
ing a "3D i-See sensor" function.
Centrally controlled
Appears for a certain period of time when a centrally-con-
trolled item is operated.
Preliminary error display
A check code appears during the preliminary error.
34
2
Fri
Auto
Set temp.
83
Temp.
Fan
5
3
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents