Huawei e3131 Manual page 2

Getting Your USB Stick Ready
Open the front cover to remove it from the USB Stick.
1.
Insert the SIM/USIM card and the microSD card into the corresponding card slots, as shown in the following figure.
2.
Replace the front cover and click it into place.
3.
Note:
The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself.

Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the SIM/USIM card slot and the microSD

card is inserted according to the direction as labeled on the microSD card slot.Do not remove the microSD or SIM/USIM card
when the card is in use. Otherwise, the card as well as your USB Stick may get damaged and the data stored on the card may
be corrupted
Installation/Removal Guide
The procedure for installing the management program depends on the operating system (OS) installed on your PC. The
following sections take Windows XP as an example.
Connecting the USB Stick to a PC
Plug the USB Stick into the USB port of your PC.
Installing the USB Stick Management Program
Connect the USB Stick with the PC.
1.
The OS automatically detects and recognizes the new hardware and starts the installation wizard.
2.
Note:
If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run
the program.
Follow the on-screen instructions of the installation wizard.
3.
After the program is installed, a shortcut icon for the management program appears on the desktop.
4.
1800 FLUFFY (358 339)
mobile broadband USB
1300 943 425
150 Gladstone Street, South Melbourne VIC 3205
Huawei-e3131
info@cloudtelecom.com.au