ASROCK Z590 PHANTOM GAMING 4 User Manual page 70

maximum possible ratio for SSE workloads.
CPU Cache Ratio
The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.
GT Frequency
Configure the frequency of the integrated GPU.
BCLK Frequency
The CPU speed is determined by the CPU Ratio multiplied with the BCLK. Increas-
ing the BCLK will increase the internal CPU clock speed but also affect the clock
speed of other components.
BCLK Spread Spectrum Mode
Enable Spread Spectrum to reduce electromagnetic interference for passing EMI
tests. Disable to achieve higher clock speeds when overclocking.
BCLK Aware Adaptive Voltage
BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
PVD Ratio Threshold
Select PVD Ratio Threshold Value from Range 1 to 40.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
62