Display Bezel - Dell Inspirion 510M Service Manual

Display Assembly and Display Latch: Dell Inspiron 510m Service Manual
1 M2 x 5-mm screws (6) 4 display panel
2 display bumpers (6)

3 display bezel

Display Bezel
CAUTION: Before performing the following procedures, read the safety instructions
in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the display
4. Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of
the bezel.
5. Remove the six M2 x 5-mm screws located on the front of the bezel.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to the
bezel.
6. Starting at the bottom of the display panel (by the DELL™ logo), use your fingers to separate
the bezel from the top cover by lifting the inside edge of the bezel away from the top cover.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ecked%20ok/Inspiron/510M/510M%20SM/display.htm (6 of 12)6/21/2004 12:34:56 AM
5 top cover
6 M2 x 5-mm screws (8)
"Preparing to Work Inside the
assembly.
Computer."