Table of Contents
Advertisement
System Agent PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Atom Core PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Memory Controller PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
AVX Configuration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Configuration
Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
Core Extra Turbo Voltage
Specifies the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Offset Mode
Selects between Legacy and Selection modes. Need Reset System after enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global offset for the entire VF curve. In Selection modes, setting a selected VF point.
VF Configuration Scope
Allows all cores VF curve or per-core VF curve configuration.
Core Voltage Offset
Z690 Extreme WiFi 6E
Z690 Extreme
75
Advertisement
Table of Contents
