LG F0L9DYP2 Series Service Manual page 34

DOOR
DOOR LOCK SWITCH ASSEMBLY
Clean foreign matter between Drum and Tub
① Open the Door completely, Than remove two Screw
of Hinge, pull up the door assembly and
seperate it from cabinet cover assembly.
※ Be careful! The door is heavy.
① Open the door and disassemble the CLAMP AS -
SEMBLY.
② Unscrew the 2 screws.
※ NOTE:
Reconnect the connector after replacing
the DOOR SWITCH ASSEMBLY.
① Separate the Back Cover
Take out the Heater Assembly, Wash
②
After separation Heater, use the long pole to remove
③
foreign matters (iron, coins, etc.) by Heater fixed hole
3 4
FOR LG TECHNICIAN