LG F0L9DYP2 Series Service Manual page 18

Table of Contents

Advertisement

NOTE
.
To verify the Wi-Fi connection, check that
on the control panel is lit.
.
The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
.
LG ThinQ
is not responsible for any network
connection problems or any faults,
malfunctions, or errors caused by network
connection.
.
If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
.
The Wi-Fi connection may not connect or may be
interrupted because of the home network
environment.
.
The network connection may not work properly
depending on the Internet service provider.
.
The surrounding wireless environment can
make the wireless network service run slowly.
.
The appliance cannot be registered due to
problems with the wireless signal transmission.
Unplug the appliance and wait about a minute
before trying again.
.
If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
.
The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
.
Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
.
If the security protocol of the router is set to
WEP, you may fail to set up the network. Please
change it to other security protocols (WPA2 is
recommended) and register the product again.
Installing the LG ThinQ
Application
LG ThinQ
Search for the
Google Play Store or Apple App Store on a
icon
application from the
smartphone. Follow instructions to download and
install the application.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in the
cycle.
Using this function
Put the clothes into the drum.
1
.
If desired, add bleach or fabric softener to
the appropriate areas of the dispenser.
Power
Press the
2
Press and hold
3
seconds to enable the remote control function.
Start a cycle from the
4
your smartphone.
NOTE
.
Once this function is enabled, you can only start
a cycle from the
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
.
If the door has been opened, you can not start a
cycle remotely.
Disable this function manually
When this function is activated, press and hold the
Remote Start
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
18
FOR LG TECHNICIAN
button.
Remote Start
button for 3
LG ThinQ
application on
LG ThinQ
smartphone
button for 3 seconds.

Advertisement

Table of Contents
loading

Table of Contents