Screen Problems - LG HU80KG Owner's Manual

Table of Contents

Advertisement

90

Screen Problems

First of all, perform a
check any abnormalities in the projector.
If you are using a set-top box, turn it off, and then turn it back on.
Make sure that the set-top box is correctly connected to your projector.
The screen shakes after the momentary appearance of vertical/horizontal lines
and net pattern.
Stop using items such as wireless telephones, hairdryers, electrical drills etc.
The problem is caused by high-frequency electronic devices such as another
projector or strong electromagnetic sources.
I see vertical lines in all four directions on the screen, or colors are blurred
when I try to connect to HDMI.
(Q. Settings)
Just Scan
to Off.
Set
Just Scan
shows you the original image as it is. You may see noise in all four
directions on the screen if the signal contains noise.
The screen is blank or the image is blurred when an HDMI cable is used.
Check that the HDMI® cable meets the required standards. If it is not a certified
HDMI® cable, the screen may flicker or may not display anything.
Check that the cable is properly connected. Improper connection may cause
screen flicker.
(Q. Settings)
Picture
Aspect Ratio Settings
Picture
Picture Test
Just Scan
for

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HU80KG and is the answer not in the manual?

This manual is also suitable for:

Cinebeam laser 4k

Table of Contents