h
Enabling the Front HDMI Port
The HDMI port on the system front panel can be used to connect a VR device or a
monitor� Follow the steps below to enable the front HDMI port:
1� Find the HDMI cable in the package� A regular HDMI to HDMI cable will also do�
2� Make certain the system is in power off mode. Connect one end of the HDMI cable
to the graphics card's HDMI port and the other end to the VR Link Port�
h
h
3� If the connection is done properly, the system rear panel should look like below and
the HDMI port on the system front panel will be ready to work�
h
2-4
h