Illustrations; Connection - Miele Complete C2 Tango Operating Instructions Manual

en

Illustrations

The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating instruc-
tions.

Connection

Attaching the suction hose
(Fig. 01 + 02)
 Insert the hose connector into the
suction opening on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
 If you want to separate the pieces
again, press the release catches at
the side of the hose connector, and
pull the suction hose out of the suc-
tion opening.
Connecting the suction hose to the
handle (Fig. 03)
 Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Your vacuum cleaner is fitted with one
of the following suction tubes, depend-
ing on model:
- EasyLock suction tube
- Telescopic suction tube
- Comfort telescopic suction tube
36
Assembling the EasyLock suction
tube (Fig. 04)
 Hold the suction tube by the connec-
tion piece and push it into the second
suction tube, turning it clockwise or
anti-clockwise until it clicks into posi-
tion.
 Slide the connection piece upwards
until it clicks into position.
Connecting the handle to the suction
tube (Fig. 05 + 06)
 Insert the handle into the suction
tube until it clicks into position. To do
this, line up the guides on the two
pieces.
 To detach the handle from the suc-
tion tube, press the release catch
and pull the handle out of the suction
tube, twisting it slightly as you do so.
Adjusting the telescopic suction tube
(Fig. 07)
One part of the telescopic suction tube
is packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
 Grasp the release mechanism and
adjust the telescopic suction tube to
the required length.
Connecting the suction tube to the
adjustable floorhead (Fig. 08)
 Push the suction tube into the floor-
head and turn it clockwise or anti-
clockwise until it clicks into position.
 To separate the suction tube from the
floorhead press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.