8. C-Base Assembly
Remove the wire connections.
Lift them upward.
Be careful not to wet the floor by the
water left in the sump
Pull out the float switch with pressing
downward softly.(not on all models)
1) Water softner
Remove the hose assembly.
Lift it upward.
Be careful not to wet the floor by the
water left in the water softner.
You can disassemble the solenoid valve
by unscrew the 2 screw.
Be sure not to lost the spring and bobbin.
2) Heater & Drain pump
Remove the wire connections.
Pull the Heater out of the Sump after
releasing the nut.
Remove 3 screw to disassemble the
Drain pump.
3) Vario Motor & Soil sensor
Remove the wire connections.
Remove 2 screws for Vario Motor.
Pull the Vario Motor, Soil Sensor and
Micro switch.
- 20 -
- 20 -