Using The Transport Handle; Using The Tilt-Back Peg - Crate BFX100T User Manual

BFX100T

Using the Transport Handle:

(1) Squeeze the handle together just below the attachment bracket
(2) Lift the lower end of the handle up and out in an arcing motion
(3) Lock the handle into the attachment bracket in its upright position
(Reverse the steps to put the handle away)

Using the Tilt-Back Peg:

(1) Lift the tilt-back peg up and out of its retaining clips
(2) Screw the threaded end of the tilt-back peg into the fitting on the rear of the cabinet
The cabinet may now be used as a personal monitor – tilting it back also increases its range of coverage
(Remove the peg from the fitting and store it in its retaining clips when not in use)
1
LIFT UP,
PULL OUT
SCREW INTO
2
FITTING
Professional, Transportable Bass Amp with DSP
3
LOCK
2
LIFT
3