Panasonic RQ-S11 Service Manual page 5

li DISASSEMBLY INSTRUCTIONS
RQ-S11
THIS UNIT CONTAINS F.P.C. BE CAREFUL NOT TO CUT OR DAMAGE THE FOIL DURING DISASSEMBLY.
eee Removal of the rear cabinet
Procedure | 1 Remove 5 screws (O~86).
1 2. Remove the claw in the direction of arrow
@, and remove the battery cover in the
direction of arrow 2).
3. Remove the rear cabinet in the direction of
arrow 4 while pushing the (+) battery
terminal in the direction of arrow 3.
Rear cabinet
(+) Battery terminal
Ref. No. Removal of the main P.C.B. and panel
2 switch P.C.B.
ae . Remove 4 screws (@~@).
. Remove 5 solders on the head FPC.
. Remove 4 solders on the motor terminal.
. Remove 2 solders on the solenoid terminal.
. Remove 1 solder on the (—) battery terminal.
. Remove the rib, and then remove the main
P.C.B. and panel switch P.C.B. carefully.
Note: 1. Be careful to handle leaf switch.
2. When the main P.C.B. is removed,
the (+) battery terminal will also
be removed.
Oooh Wh =
a ©
terminal
Main P.C.B.
Panel switch P.C.B.
Motor terminal
(4 solders)
(+) Battery terminal
¢Remove 10 solders.
Main P.C.B. 10 solders
ePush the middle cabinet in the direction of arrows
® and then remove it in the direction of arrow (1.
i
P See Qe