Table of Contents
Advertisement
Problem
Cause
Food does not
The wrong cooking mode
bake or roast
is selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven thermostat
needs adjustment.
There is aluminum foil on
racks or oven bottom.
The clock or timers are
not set correctly.
Food does not
The oven controls are not
broil properly in
set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
Action
See page 23.
See page 27.
See page 18.
See page 41.
Remove foil.
See page 16.
See page 32.
See page 32.
See the broiling guide on page
33.
Information codes
Code symbol
Meaning
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC Sensor
Temp probe malfunction.
Check the PBA NTC Sensor
Check the PBA NTC Sensor
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
Solution
1. Tap OFF, and then restart
the oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
English 59
Advertisement
Table of Contents
