Usb Cloning - Samsung HG50Q60A Install Manual

USB Cloning

Hotel Option menu > Cloning
The USB cloning function lets you download user-configured settings (Picture, Sound, Broadcasting, and Hotel Option
menu) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard file of settings and distribute that standard file to all the TVs in your facility.
• After cloning, certain features are applied when the TV is turned on again.
Cloning TV to USB: Copies stored menu settings from a TV to a USB device
Hotel Option menu > Cloning > Clone TV to USB
1. Insert a USB device into the USB port on the rear of the TV.
2. Go to the Hotel Option menu.
3. Press the up or down directional button to select Clone TV to USB, and press the Select button on the remote
control.
4. The cloning message is displayed.
– The clone folder will be labelled T-NKMUABC.
– The cloned values include the values on the guest side menu (Picture, Sound, Broadcasting and so on) and the
Hotel Option menu.
Cloning USB to TV: Copies menu settings and channel data in a USB device to a TV
Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the Select button on the remote control
for 5 seconds.
To clone data to the TV using the Hotel Option menu, follow these steps:
1. Turn the TV off.
2. Insert the USB device into the USB port on the rear of the TV.
3. Turn the TV on.
4. Go to the Hotel Option menu.
5. Press the up or down directional button to select Clone USB to TV, and press the Select button on the remote
control.
6. The message Clone settings from USB to TV is displayed. Press the Select button on the remote control.
– If there is no file to copy on the USB device or the message that there is no file appears, check the folder on your
USB device.
– The folder name should be T-NKMUABC.
– Tables that list the settings that are cloned in the Hotel Option menu begin on the next page.
Turn the TV off, insert the USB device, turn the TV on, and press the Select button on the remote control for 5
"
seconds, then this menu is displayed.
Pre-condition for cloning (check point)
• Cloning should be done between same model (same SW version).
• Before cloning, all displays should be updated at the latest version (same SW version).
English - 37