Pentax IQZoom105G Operation Manual page 15

2. Place the film cartridge in the film chamber
by fitting its fiat side on the top of the rewind
shaft first and then slide the top end of the
film cartridge into the camera.
3. Puli the film leader out far enough irom the
cartridge to reach the take-up spool. Align
the tip of the film with the film leader end
mark
O
X Slack No! OFlat Yes !
4. Close the back cover. The film automatically
advances to the first frame.
Notes:
• If there is dirt on the film detector the
film cannot be wound properly.
• Ensure the film is taut as illustrated on the il¬
lustration below. Take up any slack in the
film by pushing it back into the cartridge.
• If the end of the film leader is extremely
bent, straighten it or cut off the bent portion.
13