Advertisement
10
17
18
9. INPUT: Use this 1/4" jack to connect a keyboard or other line level signal to the corresponding
channel by means of a shielded instrument cable.
10. EQUALIZATION: Use this five-band graphic equalizer to shape the output of the amplifier to best
suit your tastes and to compensate for room acoustics.
11. REVERB RETURN: Use this control to adjust the overall amount of reverberation applied to the
output signal. This control works in conjunction with each channel's Rev/Eff control (#5).
12. LEVEL: Use this control to adjust the overall output level of the amplifier.
13. EFFECTS RETURN: Use this control to adjust the amount of external effect (if used) from the
Patch Bay Send and Return (#17, 18). This control works in conjunction with each channel's Rev/Eff
control (#5).
14. LINE OUT / HEADPHONES LEVEL: Use this control to adjust the level of the signal at the Bal.
Line Out jack (#21) and the
the Master Level control (#12).
15. ON: This LED illuminates when the amplifier is turned on.
16. (POWER): Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom
of the switch depressed).
17. SEND: Use this jack to send a signal from the amplifier to an external effects device. The signal
at this jack is pre-EQ for reduced noise.
18. RETURN: Use this jack to return a signal to the amplifier from an external effects device. The
amount of effect applied from the Send and Return jacks to the signal is governed by the Effects
Return control (#13).
KXB100 Keyboard Amplifier
11
13
12
14
19
20
21
(headphones) jack (#22). This control functions independently from
16
15
22
23
5
Advertisement
