Related Manuals for Kolin KWD-BL59BSS
Summary of Contents for Kolin KWD-BL59BSS
- Page 1 OWNER’S MANUAL MODEL: KWD-BL59BSS BOTTOM LOAD WATER DISPENSER • KEEP THIS MANUAL IN GOOD CONDITION • PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT • THE IMAGE IS FOR REFERENCE ONLY, ACTUAL UNIT MAY DIFFER FROM THE IMAGE ABOVE...
- Page 2 Thank you for choosing Kolin Water Dispenser. Kolin Philippines International Inc. offers a wide range of products that will give convenience and comfort to your homes and businesses. Our new water dispenser aims to provide you with the best hot and cold water dispensing experience. We strive...
-
Page 4: Table Of Contents
Safety Precautions Product Specification Product Features and Parts Installation Operation Proper Cleaning and Maintenance Troubleshooting... -
Page 5: Safety Precautions
To reduce the risk of injury, fire, or electric shock, the user must read this entire manual before installing, operating, and maintaining the appliance. This product dispenses water at extreme temperatures. Failure to follow the instruc- tions in this manual correctly can cause personal injury or property damage. Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of the water dispenser. -
Page 6: Product Specification
Product Specification Model Name : KWD-BL59BSS Hot water capacity : 5L/h Hot water power input : 550 W Hot water temperature range : 88 °C to 90 °C Cold water capacity : 2.8L/h Cold water power input : 80 W Cold water temperature range : 5 °C to 10 °C... -
Page 8: Installation
Installation Unpacking of the Water Dispenser • Remove the straps from the box, but DO NOT flip it over or lean it on its side. • Open the box and remove the upper protective cover of the package. • Lift the carton box up vertically. •... -
Page 9: Operation
Operation WARNING • Do NOT use other liquids such as coffee, teas, juices or beers. This unit is designed for water dispensing only. • Do NOT use alternative bottles. The water bottles designed for this dispenser are 3 and 5 gallons only. this dispenser are 3 and 5 gallons only. - Page 10 After filling the container to the desired level, release the button. NOTE: Practice basic safety precautions when dispensing hot water as the max- imum temperature can reach up to 90°C. Replacing Empty Bottle Gently open the door to keep it at the proper distance from the machine in order to pull out the sucking device.
-
Page 11: Proper Cleaning And Maintenance
Proper Cleaning and Maintenance General Cleaning This cleaning will only take less than 5 minutes to perform. Do NOT use abrasive materials or chemical cleaners Use a soft cloth and warm, soapy water to clean cabinet surfaces. Wipe dust from the back of the dispenser to improve efficiency. Remove the drip tray assembly by sliding it forward. - Page 12 III. Sanitize Storage Tanks Fill an empty water bottle with a sanitizing solution. Place the suction pipe inside the bottle and tighten the handle. Close the cabinet door after inserting the bottle. Plug the unit into the nearest power source. Fill the empty tanks with the sanitizing solution.
-
Page 13: Troubleshooting
Troubleshooting Problem Possible Cause Water dispenser does not • Not plugged operate • The circuit breaker tripped or blown fuse Water dispenser is not cold • Check to be sure the cold switch on the enough back is turned on •... - Page 14 The design and specifications are subject to change without prior notice for prod- uct improvement. Any updates to the manual will be uploaded to the service website, please check for the latest version. If you have any concerns, please contact us at the following: Customer hotline: (02) 8852 6868 Text hotline:...
Need help?
Do you have a question about the KWD-BL59BSS and is the answer not in the manual?
Questions and answers