Toshiba Satellite M500-ST5405 Resource Manual page 48

48
Using the optical drive
(Sample Illustration) Positioning the disc in the drive
Removing a disc (slot-type drive)
1 Locate and press the eject button.
The disc partially ejects from the slot.
2 Grasp the disc and remove it from the computer, then place the
disc in its protective cover.
Inserting an optical disc (tray-type drive)
(Available on certain models)
To insert an optical disc into the drive:
1 Make sure the computer is turned on.
The drive will not open if the computer's power is off.
2 Make sure the drive's in-use indicator light is off.
3 Press the drive's eject button.
The disc tray slides partially out of the drive.
4 Grasp the tray and pull it fully open.
Use only standard (12 cm) CD or DVD Discs. Any other size or shape
disc cannot be removed from this slot and may damage the system.
Do not press the eject button or turn off the computer while the drive
in-use indicator light is glowing. Doing so could damage the disk or
the drive.
The computer must be powered on to eject a disc.
Before putting on headphones to listen, turn the volume down. Do
not set the volume too high when using the headphones. Continuous
exposure to loud sound can harm your hearing.