Haier 29T9D Service Manual page 25

j. Clock setting and timer on/off functions
TIME
1
2
CH+
2
MENU
VOL-
CH-
TIME
1
2
CH+
2
MENU
VOL-
CH-
3
25
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock loses power and will need to
be reset when the power is reconnected.
1 Press the TIME
and the TIME menu display on
the screen.
VOL+
2Press the CH
"CLOCK", then press the VOL -
/+ buttons to adjust the time in
hour position; press again the
CH+/- buttons to select the
time in minute position, then
press the VOL -/ +buttons to
adjust the value of minutes
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
1 Press the TIME
to call up the TIME menu on the
screen.
2 Press the CH+/- buttons to
3
select "ON TIME", then press
the VOL -/+ buttons to set the
value in hour position; press
again the CH+/- buttons to
VOL+
select the minute position and
set the value of the minute.(take
18:00 as an example)
3 Press the CH+/- buttons to
select "ON PROG", then press
the VOL-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
menu button,
+/- buttons select
.
menu button
Program Diagram
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 1
OFF TIME --:--
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 1
OFF TIME --:--
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 0
REMIND TIME --:--
REMIND PROG 1